John Wayne
Member
- Location
- Gaithersburg, Maryland
When installing an outlet in the back of the fireplace for an insert I typically come in the back with UF wire to a 1900 box. Do I need to sleeve the wire? Thanks
Fireplace outlet
- Thread starter John Wayne
- Start date
- Status
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
Not unless it's subject to damage.
Sierrasparky
Senior Member
- Location
- USA
- Occupation
- Electrician ,contractor
If it passes through the metal firebox I would at least pass through a bushing.
readydave8
re member
- Location
- Clarkesville, Georgia
- Occupation
- electrician
I also am curious:?
John Wayne
Member
- Location
- Gaithersburg, Maryland
I was just using that as an example. Thanks for the help
- Status