I have an existing equipment room with two existing 208V panels on one wall with space in between to add a third panel. The room dimensions are 7'9" x 6'1" (those three panels are on the 7'9" wall) and I am planning to add, in addition to that panel in between the existing two, 2 more panels on the wall facing them: one 208V and one 480V. Obviously the clearances will overlap between the panels on one wall and those on the wall facing them. Is this allowed? I do not see any NEC article that prohibit such an installation.
Fitting Panels in a Room
- Thread starter elecshop
- Start date
- Status
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
Yes, space may be shared.
- Status