Fittings for nonmetallic-sheathed cable

Status
Not open for further replies.
Internal clamps for nonmetallic sheathed cable

Internal clamps for nonmetallic sheathed cable

Clamps for nonmetallic sheathed cable in cable steel boxes. The boxes and integral clamps are made of pre-galvanized steel sheet. UL requires to ccomply to 'Metallic Fitting accelerated aging and dielectric voltage-withstand test' .The assembly include a clamp and two pryout in boxes.I don't know why and how to offer insulation protection for NM cable.
 
That is something that would apply to someone making the cable, or making clamps, or making some kind of equipment that used NM cable in an assembly subject to UL listing requirements.

The other case where I have seen such things is in military equipment where some geek has written a specification that a piece of equipment must last for 20 years without failure and they want you to prove that it will survive some outrageous combination of temperature cycling between -40 and + 160 F, ozone, ultraviolet, fungus, humidity, and whatever else they can think of.
 
Status
Not open for further replies.
Top