Mustwin351
Senior Member
- Location
- Texas
Today I was searching for the cause of a breaker tripping. Unrelated to the breaker tripping but on the same circuit are four 70w pulse start metal halide fixtures. When testing continuity from hot to ground my meter would give me a pulsating continuity beep as seen in the video. I still got the same result on one of the fixtures when I tested it’s black lead to ground so it was isolated from the rest of the circuit. The neutral of the fixtuee was still conected to my grounded conductor when I did this but don’t believe that should affect it. What may be the cause for two different fluke meters to act like this?