WA_Sparky
Electrical Engineer
- Location
- Vancouver, WA, Clark
- Occupation
- Electrical Engineer
General question for you all. I have an existing project with a generator connected to (2) ATS's. Each ATS serves its own building. Client is wanting us to pull separate Utility feed for building #2 there and continue using generator and ATS's.
If building #1 loses power, gen kicks on, ATS#1 switches properly to E-Power... Will ATS #2 serving building #2 (Whos normal power is still available) transfer to E power or are ATS's smart enough to recognize normal power is still available and not transfer even if E-Power branch is live?
Client is looking for cheap solutions to their project. Ideally adding a second gen is not the best solution if we dont have to.
Thanks,
If building #1 loses power, gen kicks on, ATS#1 switches properly to E-Power... Will ATS #2 serving building #2 (Whos normal power is still available) transfer to E power or are ATS's smart enough to recognize normal power is still available and not transfer even if E-Power branch is live?
Client is looking for cheap solutions to their project. Ideally adding a second gen is not the best solution if we dont have to.
Thanks,