carp104
New User
- Location
- Central Ohio
Hello,
I'm hoping someone can tell me why this won't work, but here goes;
I am planning on being on the road several times this year to the point where after fishing a given lake, I will be trailering up my boat and my partner and I will be driving directly to a tournament at another lake many hours away, giving us basically no time to charge the boat batteries in-between. My boat has four 12V batteries, all charged off a 4-bank charger at 10amps on each bank.
My math tells me that 10A x 12V x 4 Batteries = 480 Watts of power needed to feed the charger, so I am looking at this little guy:
https://www.ebay.com/itm/Sportsman-...:FedExHomeDelivery!43026!US!-1&frcectupt=true
It caps at 6.6A, but that is at 120VAC, since it is a 800/1000W generator. So while I need 40A to charge all four batteries at 12V, I should only need about 4A at 120VAC through the generators 120VAC port if I plug my battery charger into this port - or am I completely missing something here?
In my eyes I cannot find a reason why this generator would not get the job done. Can anyone else shed some light on this?
I'm hoping someone can tell me why this won't work, but here goes;
I am planning on being on the road several times this year to the point where after fishing a given lake, I will be trailering up my boat and my partner and I will be driving directly to a tournament at another lake many hours away, giving us basically no time to charge the boat batteries in-between. My boat has four 12V batteries, all charged off a 4-bank charger at 10amps on each bank.
My math tells me that 10A x 12V x 4 Batteries = 480 Watts of power needed to feed the charger, so I am looking at this little guy:
https://www.ebay.com/itm/Sportsman-...:FedExHomeDelivery!43026!US!-1&frcectupt=true
It caps at 6.6A, but that is at 120VAC, since it is a 800/1000W generator. So while I need 40A to charge all four batteries at 12V, I should only need about 4A at 120VAC through the generators 120VAC port if I plug my battery charger into this port - or am I completely missing something here?
In my eyes I cannot find a reason why this generator would not get the job done. Can anyone else shed some light on this?