Getting a loadcenter out of brick

Status
Not open for further replies.
Is it just showing a broken image link? I can see them on my end.

I’ll try again later. I’m still out here working on this thing.


Sent from my iPhone using Tapatalk
 
brantmacga said:
Is it just showing a broken image link? I can see them on my end.

I’ll try again later. I’m still out here working on this thing.


Sent from my iPhone using Tapatalk
Click to expand...
Pictures in your OP are fine, the recent post there isn't even a broken link image just the text of your post.
 
kwired said:
Pictures in your OP are fine, the recent post there isn't even a broken link image just the text of your post.
Click to expand...

Trying to post them again here...

92ddae798ffd213b735a5e7c14d391ac.jpg


b163dc4ada8f85b39015167e4137b828.jpg


6a225baa926d690bebd2d1f85ed6fab2.jpg


Should see three pics above this line.

And pic below is where I stopped today. Pretty much done. I ran short a spring nut to add another strut support where the conduit meets the wall here. And finish making up the pool panel. 9/hrs on site and 3/hrs driving. I’m spent.

44abbbb3300598e904e7be10f3ec6e5e.jpg



Sent from my iPhone using Tapatalk
 
nickelec said:
Looks good that's exactly what I was explaining

Sent from my SM-G950U using Tapatalk
Click to expand...

So you can see it, but others can’t?

I see you’re on tapatalk too. That’s what I posted from, and I see the app just updated. I wonder if that’s what is causing the issue.


Sent from my iPhone using Tapatalk
 
nickelec said:
Quick question why the bonding bushings if everything is NM?

Sent from my SM-G950U using Tapatalk
Click to expand...

I used a Myers hub trying to seal it better. You can see it in the pic on the end of the carflex connector. And I laid a thick bead of silicone around the hole behind the box.


Sent from my iPhone using Tapatalk
 
Do you have lfnmc (dark grey) glued to rpvc (light grey)?

Although not your job, the homeowner may very well want heat tracing on all of those pipes, replacing those glued in ball valves if and when they break will be a pain in the butt... I would have used unions that could be simply unscrewed to replace the valves... The handles and shafts on the larger ones also have a tendency to snap with age.
 
Little Bill said:
They showed up for me too now. Don't know why they didn't when first posted.
Click to expand...
The explanation may lie in the way Tapatalk deals with attachments, particularly image insertions.

I have many times seen threads in which a set of images were not visible in the body of the thread, even though they showed up in thumbnail form in the thread list.
In this case the image link served to the Tapatalk App (as seen by using the Edit function, which is only available to forum admins and moderators) points to an image file on the Tapatalk server(s) rather than to the original image file pointed to by the forum post. That image file might be either a forum attachement or a link to an external hosting site. In either case the caching of the images to the Tapatalk server (presumably to increase viewing efficiency) seems to be flaky from time to time.

Continued..... In this particular case, it is even more interesting: The original post, for whatever reason known only to Tapatalk, did not actually send to the forum software either an attachment request or a link to a public photo hosting site. Instead it sent a direct link to the images on a Tapatalk content server. So any irregularities in the later viewing of the images are probably the result of a bug or disruption within the Tapatalk system.
 
Last edited:
Status
Not open for further replies.
Top