mknoblock
Member
- Location
- Livingston,TN Overton
I have a local inspector who says my existing 60A 240V feed to an upright tanning bed needs GFCI protection. I don't agree, because the manual/wiring diagram makes no mention of GFCI, and there is no neutral carried out to the supply (just line-line-ground). Every component inside the bed is 240V, with no 120VAC used anywhere. The GFCI (Siemens) needs a 'load neutral' but there is none.
I have to have a good reason to argue, since this is a small rural community, and you just don't argue with the inspector. Anything in NEC 2014 that requires GFCI protection for this big of a tanning bed?
I have to have a good reason to argue, since this is a small rural community, and you just don't argue with the inspector. Anything in NEC 2014 that requires GFCI protection for this big of a tanning bed?