NetNathan
Net is where I be and Nathan is me
- Location
- Corona, CA
- Occupation
- Mgr. Electrical and Controls Eng
I am installing a GE Spectra 600A CB (480V/3PH/4wire) as a main in a distribution panel.
It has a built in GFI system built in with a separate junction block for connecting the Neutral and VAC from each phase.
I plan on adding a small junction box next to the panel for a terminal strip for the GFI junction block (for testing without removing the panel cover) and because I am also required to supply in coming and out going indicator lights on the main CB.
Should I fuse the voltage wires? The wiring diagram shows no fuses.
I am fusing the indicator lights for each phase.
I am running #14 conductors.
It has a built in GFI system built in with a separate junction block for connecting the Neutral and VAC from each phase.
I plan on adding a small junction box next to the panel for a terminal strip for the GFI junction block (for testing without removing the panel cover) and because I am also required to supply in coming and out going indicator lights on the main CB.
Should I fuse the voltage wires? The wiring diagram shows no fuses.
I am fusing the indicator lights for each phase.
I am running #14 conductors.