Grounding Water Line

[stanwax]

I was trying to post the pic of the water line 2.3 mb. However for some unknown reason they say failed. Never had this problem at other sties.
The problem is, or no problem ? The water supply line, is black plastic, or covered in plastic. It is stamped ASTM. However the water meter has a bonding jumper at meter and is the electrical system ground. Without posting the pic, it well be hard to get a good answer. Their is a union at the line. It could be a flared fitting or a barbed plastic to copper adapter. It has a built in screw down clamp over the plastic ? I could use a ohm meter between outside faucet and curb stop, but thought I would post first. The home was built in 2000 and the electrical service inspected.
I could watch the file upload 100% than says failed ?

 

[Jraef]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.