Homeline and twin breakers

[iaov]

I'm well aware of all of this. In fact I mentioned some of it in my post that you partially quoted.

I also know that I can get a tandem into any panel. :wink:

Haven't found one that has stopped me either. Wasn't even aware it was an issue until reading this post.:smile:

 

[Dennis Alwon]

Haven't found one that has stopped me either. Wasn't even aware it was an issue until reading this post.:smile:

What brand are you using? I know you can get some of the old ITE twins in if you modify the breaker a bit but it ain't legal. :smile:

 

[Cow]

What brand are you using? I know you can get some of the old ITE twins in if you modify the breaker a bit but it ain't legal. :smile:

Siemens too.

 

[Power Tech]

They do make 2 different twin breakers for Square D and Murry etc. The $7 type has a rejection clip or shallow clip and can only be installed in a notched bussing. The $14 type has a deep clip and can be installed on the solid and notched bussing.

Terry
Power Tech

 

[frenchelectrican]

They do make 2 different twin breakers for Square D and Murry etc. The $7 type has a rejection clip or shallow clip and can only be installed in a notched bussing. The $14 type has a deep clip and can be installed on the solid and notched bussing.

Terry
Power Tech

Yeah they do and one of our members here have specal tool he can actally make a punch gimzo to used on the Sq QO series sooner or later this person will tell ya on this one.

Merci,Marc

 

[ivsenroute]

Who inspects the inspector?

Whoever is the AHJ where I perform work.

In areas where there is no AHJ I hire an electrical inspector of my choosing.

I have yet to perform work where I inspect.