Honeywell R841E

[FrancisDoody]

R841E has two bi-metal switches. Can I bring two circuits into the relay. Hit a different switch for each circuit. Exit the relay to the loads. Or am I limited to one source feeding two loads. Thanks Fran

 

[Smart $]

R841E has two bi-metal switches. Can I bring two circuits into the relay. Hit a different switch for each circuit. Exit the relay to the loads. Or am I limited to one source feeding two loads. Thanks Fran

Well if you go by the instructions [110.3(B), IIRC], you're limited to one supply circuit. Disregarding that, doing what you want to do is possible. See Fig. 10 or 11 in instructions for internal schematic...

http://www.google.com/url?sa=t&rct=...=hULgNhIwpR3zo9NR6xIS-g&bvm=bv.42553238,d.dmQ

The striped leads appear to be a dry contact.

 

[FrancisDoody]

I just pulled the cut sheet on the White Rogers relay and that unit details two feeds to two loads
using two micro switches. Looks identical to the R841E.

 

[Smart $]

I just pulled the cut sheet on the White Rogers relay and that unit details two feeds to two loads
using two micro switches. Looks identical to the R841E.

And your point???