hooking up 220V pool motor

Status
Not open for further replies.
C

Carlie

New User
Location
93306
Occupation
retired
My old pump motor was a dual speed 220V motor. I bought a singe speed 220V motor to replace the old one since I only used the high speed anyway. I have 1 green wire, 1 white wire and 2 red wires. On the new pump I have a green screw, black screw, and an L1 and L2 screw.I think I am getting bad info from the website that I bought the motor from. Can a qualified electrician please let me know how to wire this?
 
I am closing this thread, in accordance with the Forum Rules.

This site is designed for:
  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
Click to expand...
If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking report at the lower left hand corner of the post
 
Status
Not open for further replies.
Top