BatmanisWatching1987
Senior Member
- Location
- NJ
- Occupation
- Jr. EE
I have a 84 Pole Panel (120/208V/3P/) with 74 Outlets and 10 Lighting circuits all on 20 AMP breaker each.
What is the best way to calculate the existing load for the office
Should I use Table 220.44 (Demand Factors for Non-Dwelling Receptacle Loads), but I'm confused on how much load I should show on each circuit since it states "These demand factor do not apply to receptacle load calculated based on 220.14(K)(1).
I assume lighting will be at 100% based on Table 220.42 (Lighting Load Demand Factor), since I don't see a a separate category for Office.
Or is my best option is to use Table 220.102 (Method for calculating Farm Loads for other than Dwelling Unit)
What is the best way to calculate the existing load for the office
Should I use Table 220.44 (Demand Factors for Non-Dwelling Receptacle Loads), but I'm confused on how much load I should show on each circuit since it states "These demand factor do not apply to receptacle load calculated based on 220.14(K)(1).
I assume lighting will be at 100% based on Table 220.42 (Lighting Load Demand Factor), since I don't see a a separate category for Office.
Or is my best option is to use Table 220.102 (Method for calculating Farm Loads for other than Dwelling Unit)
