How to circuit with an AFCI
- Thread starter socalclem
- Start date
- Status
allenwayne
Senior Member
Re: How to circuit with an AFCI
I saved the pm from the moderator if you like I could send it to you to rattle that selective memory that you have shown you have.I have my masters card in my wallet so personally I don`t care what you think.As a foot note you don`t remember ??? You put allot of effort in those posts that you should remember.But then again since this is your only means of fun I`ll back off have a great life Roger and remeber keep your enemies cloe and your family and friends closer
I saved the pm from the moderator if you like I could send it to you to rattle that selective memory that you have shown you have.I have my masters card in my wallet so personally I don`t care what you think.As a foot note you don`t remember ??? You put allot of effort in those posts that you should remember.But then again since this is your only means of fun I`ll back off have a great life Roger and remeber keep your enemies cloe and your family and friends closer
allenwayne
Senior Member
Re: How to circuit with an AFCI
Sorry guys this is a thread about how to circuit an afci and shouldn`t have gone off on a tangent on how to shut up an analy retentive idiot.Again my apoligies.
Sorry guys this is a thread about how to circuit an afci and shouldn`t have gone off on a tangent on how to shut up an analy retentive idiot.Again my apoligies.
Re: How to circuit with an AFCI
analy retentive idiot--oops I sorry, I thought you wanted me --come on guys --dont leave this here--its funny ,I came here to try to learn. but as of late all I see are you guys arguing and not coming to any conclusion on anything--If I just want to kill time I can go to the darwin site--you cant stop me from reading but I am learning who to pass by--if only I--oh wth--if all used caps you would not know who was yelling would you
analy retentive idiot--oops I sorry, I thought you wanted me --come on guys --dont leave this here--its funny ,I came here to try to learn. but as of late all I see are you guys arguing and not coming to any conclusion on anything--If I just want to kill time I can go to the darwin site--you cant stop me from reading but I am learning who to pass by--if only I--oh wth--if all used caps you would not know who was yelling would you
allenwayne
Senior Member
Re: How to circuit with an AFCI
Mad nope just puzzeled as to why someone that always brings up past posts has trouble finding thiers that showed thier narrow minded utterances.Busted ,nope again I just looked in my wallet still there.Oh I did get busted once back in the 70`s when groveing was groveing.
Sorry people this is my last responce to a blow hard that obviously refuses to own up to what they did earlier in this forum and that is take away from a topic in an attempt to make themselves look like something they are not a man.
Mad nope just puzzeled as to why someone that always brings up past posts has trouble finding thiers that showed thier narrow minded utterances.Busted ,nope again I just looked in my wallet still there.Oh I did get busted once back in the 70`s when groveing was groveing.
Sorry people this is my last responce to a blow hard that obviously refuses to own up to what they did earlier in this forum and that is take away from a topic in an attempt to make themselves look like something they are not a man.
Re: How to circuit with an AFCI
Okay Allen, since you're being so mean
this will be my last post in this thread too, so I'll leave it with this for 49bill. Click Here and hit the back button
You can go Here and type in my name for my license info (edited after Mike brought this to my attention)
Roger
[ February 22, 2006, 07:02 AM: Message edited by: roger ]
Okay Allen, since you're being so mean
You can go Here and type in my name for my license info (edited after Mike brought this to my attention)
Roger
[ February 22, 2006, 07:02 AM: Message edited by: roger ]
jwelectric
Senior Member
- Location
- North Carolina
Re: How to circuit with an AFCI
Well what the "heck" is going on with this forum any more?
You people act as though you are afraid to let someone know just who or what you are.
I am proud of the fact that I have passed every test that the state of North Carolina has to offer.
I have passed the hardest and at the highest levels that NC offers and why should I not be proud of this fact?
If there is anyone out there in cyber space who wants to know my credentials go here and search this
You can find out a little more about me if you check this out
Proud of what I do and my accomplishments and I dare anyone of the rest of you to step to the plate and let the world know just how smart you are,either put up or shut up as the saying goes.
Well what the "heck" is going on with this forum any more?
You people act as though you are afraid to let someone know just who or what you are.
I am proud of the fact that I have passed every test that the state of North Carolina has to offer.
I have passed the hardest and at the highest levels that NC offers and why should I not be proud of this fact?
If there is anyone out there in cyber space who wants to know my credentials go here and search this
You can find out a little more about me if you check this out
Proud of what I do and my accomplishments and I dare anyone of the rest of you to step to the plate and let the world know just how smart you are,either put up or shut up as the saying goes.
stars13bars2
Senior Member
Re: How to circuit with an AFCI
Hey JW they must have yours mislisted too, as all I found was an electrical license.Originally posted by jwelectric:
I am proud of the fact that I have passed every test that the state of North Carolina has to offer.
jwelectric
Senior Member
- Location
- North Carolina
Re: How to circuit with an AFCI
I have had my license for more years than some in here are old.
If any of you are ever in town stop in and see me I will let you ride for a while.
Well almost nine hours later and no takers.Originally posted by stars13bars2:
Hey JW they must have yours mislisted too, as all I found was an electrical license.Originally posted by jwelectric:
I am proud of the fact that I have passed every test that the state of North Carolina has to offer.
I have had my license for more years than some in here are old.
If any of you are ever in town stop in and see me I will let you ride for a while.
- Location
- Windsor, CO NEC: 2023
- Occupation
- Hospital Master Electrician
Re: How to circuit with an AFCI
That just means you're older, not wiser.
Re: How to circuit with an AFCI
I hired a guy once, said he had 10 years experience--didn't take long to figure that he fibbed--he had 1 year experience 10 times--say it took me a while to learn some of your abbr,,,I couldnt find any code reference to IMHO,,pretty neet though--frankly my dear I could give a xx,, you figure it out
I hired a guy once, said he had 10 years experience--didn't take long to figure that he fibbed--he had 1 year experience 10 times--say it took me a while to learn some of your abbr,,,I couldnt find any code reference to IMHO,,pretty neet though--frankly my dear I could give a xx,, you figure it out
allenwayne
Senior Member
Re: How to circuit with an AFCI
So easy to go into denial.BTW allenwayne is a partial name I use here
So easy to go into denial.BTW allenwayne is a partial name I use here
Re: How to circuit with an AFCI
49bill:
I think you have hit on a good idea. They should use caps during these temper tantrums so we could just skip over to the next code related post. I think most of us don't care who's is biggest.
49bill:
I think you have hit on a good idea. They should use caps during these temper tantrums so we could just skip over to the next code related post. I think most of us don't care who's is biggest.
jwelectric
Senior Member
- Location
- North Carolina
Re: How to circuit with an AFCI
Maybe the whole forum is ashamed of some of the statements they have made.
One whole day has come and gone and not one person has dared to prove up that they are who or what they say they are.Originally posted by jwelectric:
Well what the "heck" is going on with this forum any more?
You people act as though you are afraid to let someone know just who or what you are.
I am proud of the fact that I have passed every test that the state of North Carolina has to offer.
I have passed the hardest and at the highest levels that NC offers and why should I not be proud of this fact?
If there is anyone out there in cyber space who wants to know my credentials go here and search this
You can find out a little more about me if you check this out
Proud of what I do and my accomplishments and I dare anyone of the rest of you to step to the plate and let the world know just how smart you are,either put up or shut up as the saying goes.
Maybe the whole forum is ashamed of some of the statements they have made.
- Location
- Massachusetts
Re: How to circuit with an AFCI
Mass. Division of Professional Licensure
Connecticut
Rhode Islands site is having problems but trust me I have one there too.
I guess I should add that a Journeyman in this area can do any wiring but if you want to run a company with more than one employee you must get the Masters.
I have never had the need for the masters and it would only cost me money.
[ February 23, 2006, 09:37 AM: Message edited by: iwire ]
Mass. Division of Professional Licensure
Connecticut
Rhode Islands site is having problems but trust me I have one there too.
I guess I should add that a Journeyman in this area can do any wiring but if you want to run a company with more than one employee you must get the Masters.
I have never had the need for the masters and it would only cost me money.
[ February 23, 2006, 09:37 AM: Message edited by: iwire ]
jwelectric
Senior Member
- Location
- North Carolina
Re: How to circuit with an AFCI
I knew that without a doubt that there was more than me out there that is proud to be an electrocuters.
I also knew that when called on the two MEN above would step to the plate.
Thank both of you.
Anyone else not ashamed?
I knew that without a doubt that there was more than me out there that is proud to be an electrocuters.
I also knew that when called on the two MEN above would step to the plate.
Thank both of you.
Anyone else not ashamed?
- Status