How to Guy Service Mast Over Roof

[MisterMoSparky]

Doing a typical 200 A Service exchange with 2” IMC. My local Poco requires guying for any mast more than 36” above the roof. They also require at least 12’ to center of weatherhead from grade. I’ve already decided I need to support the mast above the roof I just need suggestions on the cleanest way to do that. I watched some videos where they screwed eyebolts on the roof into the roof trusses and use aircraft cable to wrap around a 2” mini on the conduit. I’m not too sure how to go about terminating the aircraft cable once it does wrap around all the supports though. Any help please

 

[infinity]

You can use a Crosby style connector the terminate the cable.

 

[tortuga]

Check at your local supply house, ours carries two types of back guy kits. One has the aircraft cable and there is one called a 'rigid' guy kit where you can cut and thread two pieces of 3/4: