Installing an outdoor spa

[Baldyc]

I am installing a 240v 50 amp outdoor spa.
I have run 3 #4 aluminum conductors to a 50amp GFCI disconnect (about 175ft) , driven 2 ground rods 6ft apart and grounded the GFCI disconnect with both rods using #8 solid copper wire. I have set up a 1" liquiflex from the GFCI disconnect to the (future) spa with 3 #6 aluminum conductors and 1- 8ga insulated copper ground.
Am I good?

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.

If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the button at the bottom left corner of the post.