Led driver wiring

Status
Not open for further replies.
S'mise

S'mise

Senior Member
Location
Michigan
I'm putting about 12 of these led fixtures in a soffit.
https://www.amazon.com/gp/aw/d/B013...s=led+thin&dpPl=1&dpID=31SgLrKcM3L&ref=plSrch

Led driver has a small input cable (22-2) with about a 5 or 6 inch long whip.
What's the best way to wire these things?
I was thinking about using handy boxes with strain relief (cord grip) fittings, since cable is so small, and mounting driver next to box.
This doesn't leave enough cable to properly splice in box but I don't see what else I can do.
Can I get away with just using a romex clamp?
 
I'm not sure if this is the exact fixture I have but I wished I verified that it was listed.:ashamed1:
I read one review from an installer that said he put the driver in a metal box in case of cataclysmic failure, but I'm thinking it needs proper ventilation.
 
I have a feeling it is not listed. In the Q & A someone did ask about UL and didn't get a definiite answer either.

some other similar products that were suggested said the were listed without having to look deep into details.
 
Status
Not open for further replies.
Top