LED Load

[mstrlucky74]

When you are figuring LED light fixture load you cant look at the fixture/lamp wattage correct? Y

 

[mstrlucky74]

So how would you go about figuring the load for this fixture? Not much info on the driver?

http://www.innovativelight.com/wp-content/uploads/2013/11/Smooth_LED_Light_C_Series_2x2.pdf

 

[GoldDigger]

So how would you go about figuring the load for this fixture? Not much info on the driver?

http://www.innovativelight.com/wp-content/uploads/2013/11/Smooth_LED_Light_C_Series_2x2.pdf

Driver and LEDs seem to replace existing tubes and ballasts, so input would be whatever AC voltage was originally used, up to a max of 277V.
The energy given could be into driver or delivered to the LED units.
I would figure at least 90% efficiency and power factor of .9 unless I could get better info from the specs.

 

[Knightryder12]

So how would you go about figuring the load for this fixture? Not much info on the driver?

http://www.innovativelight.com/wp-content/uploads/2013/11/Smooth_LED_Light_C_Series_2x2.pdf

Wouldn't you just use the info in the Energy (Watts) line in the Spec info table? Either 32.7 or 33.5 watts depending on the model number?