LED retrofits

[steve_p]

Have a commercial customer with 120V HPS fixtures around the property. Post lights, 12x12 fixtures recessed into block walls.
These are mogul base and vary from 50W to 150w.

Seems to be set on LED's as a replacement.

Anyone found a source for these?



Steve

 

[bpk]

i dont know about the listing of the fixture (if it is a violation) but in our facilities we have done some conversions by bypassing the ballast entirely- and connecting the incoming voltage directly to the socket and installing a LED or CFL mogul based screw in bulb.

 

[steve_p]

Thanks, that is what I am looking to do. Found from Maxled that are 180 degree mogul base.
Fingers crossed that there are decent quality.

Steve

 

[TNBaer]

Using lamps is probably a bad way to go. You need to manage the heat, if you don't do that they will fail early.

Check this: http://www.sensity.com/product-portfolio/led-area-lighting-retrofit-600-series

 

[MichaelKelley]

LED Acron Lights

LED Acron Lights

Can You suggest LED Acron lights which's Light output is 5400-6000 lumens. ?

 

[TNBaer]

Can You suggest LED Acron lights which's Light output is 5400-6000 lumens. ?

Sure, Sensity makes these: http://www.sensity.com/sites/default/files/pdf/20130403_X-PGPostTop_Cutsheet_Sensity.pdf
And Beacon does as well: http://www.beaconproducts.com/content/products/specs/specs_files/bea_lrk3d_spec.pdf

Both are pretty nice. The Sensity one will have higher lumen packages.