guggemos
Member
- Location
- Richmond, California
When using LFMC do I need to use grounding ferrules on the flex up to 1 1/4" conduit and a jumper for conduit sizes 1 1/2" and larger?
LFMC & grounding
- Thread starter guggemos
- Start date
- Status
barbeer
Senior Member
- Location
- Pinellas County, FL
350.60 Grounding and Bonding.
Where used to connect equipment where flexibility is required, an equipment grounding conductor shall be installed.
Where flexibility is not required, LFMC shall be permitted to be used as an equipment grounding conductor when installed in accordance with 250.118(6).
Where required or installed, equipment grounding conductors shall be installed in accordance with 250.134(B).
Where required or installed, equipment bonding jumpers shall be installed in accordance with 250.102.
FPN: See 501.30(B), 502.30(B), and 503.30(B) for types of equipment grounding conductors.
:grin:
Where used to connect equipment where flexibility is required, an equipment grounding conductor shall be installed.
Where flexibility is not required, LFMC shall be permitted to be used as an equipment grounding conductor when installed in accordance with 250.118(6).
Where required or installed, equipment grounding conductors shall be installed in accordance with 250.134(B).
Where required or installed, equipment bonding jumpers shall be installed in accordance with 250.102.
FPN: See 501.30(B), 502.30(B), and 503.30(B) for types of equipment grounding conductors.
:grin:
- Status