Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
Replacing sports field light fixtures. What exactly is meant by this...what's involved?
Lighting Relays
- Thread starter Alwayslearningelec
- Start date
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
Anyone know what's involved in closing relays?
hillbilly1
Senior Member
- Location
- North Georgia mountains
- Occupation
- Owner/electrical contractor
If the old fixtures were HID, probably incandescent backup with timer for restrike. New fixtures wireless control?
- Location
- Wisconsin
- Occupation
- PE (Retired) - Power Systems
If they are electrically held relays you will have to jumper them out.
If they are mechanically held you can move them to the on position and then remove the power to their coils.
If they are mechanically held you can move them to the on position and then remove the power to their coils.
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
Yes new fixtures have wireless control
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
Someone in my office mentioned jumping out..he probably read this...sure he doesn't really know ...lol
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
hillbilly1
Senior Member
- Location
- North Georgia mountains
- Occupation
- Owner/electrical contractor
Usually it’s worded “bypass” LOL!
Strathead
Senior Member
- Location
- Ocala, Florida, USA
- Occupation
- Electrician/Estimator/Project Manager/Superintendent
Yeah, I was thinking that. Perhaps the author knew they were mechanical, but I would bypass anyway to remove a potential future failure point. Alwayslearningelec, this means removing the wires from the contactor and splicing them together.