looking for a certain tool...

[vegasmark]

i need an electronic torque wrench with a 3/4'' drive that lets me adjust the torque up to 625 ft/lbs... i've called about 10 different companies here in town and can't find anything like that online. anyone have any bright ideas for me?

 

[chris kennedy]

Marc, pick up the phone, its for you.

 

[nakulak]

did a quick web search, this is the first thing that came up
http://www.flexibleassembly.com/s.nl/it.A/id.242/.f?sc=5&category=72

http://www.belknaptools.com/torquemodel1.asp

sears has one but its not electronic and out of stock
http://www.sears.com/shc/s/p_10153_12605_00986447000P

 

[brian john]

I assume you checked SanpOn?


Try calling a large engine comapny. The electronic might be the sticking point.

 

[Pierre C Belarge]

Most guys balk at spending $150-200 for a torque screwdriver of even $100 for a torque wrench..."what will I do with that?"

These units are not even remotely cost effective.
I would assume this type of tool is for POCOs or some large nuclear type facilities.