Looking for transformer
- Thread starter DAWGS
- Start date
- Status
masterinbama
Senior Member
- Location
- Huntsville Alabama
I just buy new EM units. I get the cheap ones here for $15.00 each (battery included).
Speedskater
Senior Member
- Location
- Cleveland, Ohio
- Occupation
- retired broadcast, audio and industrial R&D engineering
If it's output is 14Volts "DC" then it's more than a transformer.
But sometimes commercial products get strange labels like this.
But sometimes commercial products get strange labels like this.
A regular em light is 6V output. These fixtures are $250 each.
Electric-Light
Senior Member
If it's running on 120v, then a 12v DC 1.5A or so wall-wart will work functionally. For 277v, its gonna be harder to find.
hurk27
Senior Member
- Location
- Portage, Indiana NEC: 2008
I hate to say this but transformers don't output DC current, power supplies do.
If you lost a power supply then I would say something failed in the Emg light, most have voltage regulators and charging circuits that could have went bad also, like said, find a 12-15 DC volt wall wart that outputs at lease 1.5 amps, and make sure you get the polarity correct, and try it, I have a bunch of them I have picked up over the years at garage sales, I keep them around just for things like this.
If you lost a power supply then I would say something failed in the Emg light, most have voltage regulators and charging circuits that could have went bad also, like said, find a 12-15 DC volt wall wart that outputs at lease 1.5 amps, and make sure you get the polarity correct, and try it, I have a bunch of them I have picked up over the years at garage sales, I keep them around just for things like this.
- Status