low voltage bluetooth device above residential sink

[bravo69]

Hello all,

any issues installing a LV bluetooth receiver above a residential sink? 24V will be supplied in single gang box that controls a speaker. Not sure what the NEC says about it.

Thank you in advance.

 

[ActionDave]

It doesn't say anything.

 

[tw1156]

Table 11(b) Class 2 and Class 3 Direct-Current Power Source Limitations

Table 11(b) Class 2 and Class 3 Direct-Current Power Source Limitations

Is this table not applicable in this situation? Specifically note 4 which mentions DC current to be limited to 12.4 Volts peak if wet contact is likely to occur? I'm not familiar with the proposed setup you mention, and I am unsure if this section would even apply. I have used this table before, but more regarding low voltage lighting and not for this specific case and would be curious to see if anyone else mentions anything.

 

[bravo69]

Is this table not applicable in this situation? Specifically note 4 which mentions DC current to be limited to 12.4 Volts peak if wet contact is likely to occur? I'm not familiar with the proposed setup you mention, and I am unsure if this section would even apply. I have used this table before, but more regarding low voltage lighting and not for this specific case and would be curious to see if anyone else mentions anything.

I stand corrected it is 12V input.