Installed 4 power module ( PHPM-WBX-120-WH) controlled by (Lutron, Diva, DVF-103P-BR
Diva, Fluorescent Dimmers . Lutron helped us design this system over a year ago. The load is 4, 10' sections of juno standard track with 5 120v heads per section and PAR 30 lamps totaling 1500 watts on each module, below the 2000 watt rating of the modules. 2 months ago one of the circuits had problems fist thing in the morning when switched on. The lights would not respond to the dimmer switch and start very dim. It would take about an hour to get to normal brightness and work fine. This would happen randomly at opening of the store. Our solution after talking to lutron was to replace both the dimmer and the module. This has worked fine for the last 3 weeks but the problem is back again and Lutron has no ideas. Please Help!
Diva, Fluorescent Dimmers . Lutron helped us design this system over a year ago. The load is 4, 10' sections of juno standard track with 5 120v heads per section and PAR 30 lamps totaling 1500 watts on each module, below the 2000 watt rating of the modules. 2 months ago one of the circuits had problems fist thing in the morning when switched on. The lights would not respond to the dimmer switch and start very dim. It would take about an hour to get to normal brightness and work fine. This would happen randomly at opening of the store. Our solution after talking to lutron was to replace both the dimmer and the module. This has worked fine for the last 3 weeks but the problem is back again and Lutron has no ideas. Please Help!