embryo3
Member
- Location
- coral springs
I have been asked to hook up about 21 motors on a conveyor system that has a main MCP with VFD's.
the motors are individual on a raised platform (6' aff) and remote about 20 to 50' but not in sight of the main disconnect panel. Are service disconnects required for each of the individual motors under article 430
there are a few exceptions that may apply; it is an industrial area but with personnel that remove boxes from the conveyor so not just accessible by maintenance personnel. Also not sure that this qualifies as a single apparatus?
any input would be greatly appreciated
the motors are individual on a raised platform (6' aff) and remote about 20 to 50' but not in sight of the main disconnect panel. Are service disconnects required for each of the individual motors under article 430
there are a few exceptions that may apply; it is an industrial area but with personnel that remove boxes from the conveyor so not just accessible by maintenance personnel. Also not sure that this qualifies as a single apparatus?
any input would be greatly appreciated