Multi tap Connector CU to Al

Status
Not open for further replies.
mstrlucky74 said:
Trying to find a multi tap connector for splicing one set of CU 750MCM to 2 sets of AL 350MCM. Tried looking on Ilsco but was not 100%. Thanks.

Would this work?

http://www.ilsco.com//ProductsDetai...=PwsKCWwZ4OvNxibvLkwWSFr4VOyYmnLO8irUEYFlgvc=
Click to expand...

looks like it would work. there are lots of connectors out there. I have become fond of these style of late, but they are sometimes hard to come by.

http://www.panduit.com/wcs/Satellit...tion_id=2036&locale=en_us&pagename=PG_Wrapper


Have you considered std crimp on lugs and just bolting them together?
 
I trying to understand the configuration need to tap one sets of four wires to two sets of fours wires each set. I see the Ilsco listed as "four port main two port tap side etc.". I imagine on the "secondary" side of the tap each phase, neutral and ground from each set into one port but I would still need four ports. Am I thinking about this correctly. Or maybe I need a few multi taps to do this. Thanks
 
Status
Not open for further replies.
Top