I am building a power box and I have a transformer 2kva that has to feed 2 loads. Due to space restrictions I do not plan to install a secondary breaker.
But I have 2 loads which are connected directly to the transfromer secondary. They have individual breakers each and located within 10 feet of the transformer (2 feet) The breakers are rated at 1/2 of FLA of secondary. The conductor is sized at 12awg for 10A breaker exiting the transformer for 1 load aand the second one is sized at 14awg for 7.5 amp breaker.
Transformer primary is 208v and breaker is 20A.
tranformer secondary is 120v.
I this design ok? Or is there any violations?
thanks in advance
murli
But I have 2 loads which are connected directly to the transfromer secondary. They have individual breakers each and located within 10 feet of the transformer (2 feet) The breakers are rated at 1/2 of FLA of secondary. The conductor is sized at 12awg for 10A breaker exiting the transformer for 1 load aand the second one is sized at 14awg for 7.5 amp breaker.
Transformer primary is 208v and breaker is 20A.
tranformer secondary is 120v.
I this design ok? Or is there any violations?
thanks in advance
murli
