augie47 Moderator Staff member Location Tennessee Occupation State Electrical Inspector (Retired) Jun 13, 2008 #1 Sample from an inspection today:[/ATTACH] Last edited: Jun 13, 2008
augie47 Moderator Staff member Location Tennessee Occupation State Electrical Inspector (Retired) Jun 13, 2008 #2 View attachment 1806 number two
acrwc10 Master Code Professional Location CA Occupation Building inspector Jun 13, 2008 #3 If you were not half way across the country, I would swear I have seen that house. I love the connector on the LB in the attached photo.
If you were not half way across the country, I would swear I have seen that house. I love the connector on the LB in the attached photo.
iaov Senior Member Location Rhinelander WI Jun 13, 2008 #4 Is that Seal Tight going to that LB? Love the compression fitting inside the box. The panel access is special too.
Is that Seal Tight going to that LB? Love the compression fitting inside the box. The panel access is special too.
Sierrasparky Senior Member Location USA Occupation Electrician ,contractor Jun 14, 2008 #5 Nice use of rigid nipple in the top of the lower box Don't quite understand the use of the two breakers Last edited: Jun 14, 2008
Nice use of rigid nipple in the top of the lower box Don't quite understand the use of the two breakers
quogueelectric Senior Member Location new york Jun 14, 2008 #6 The use of a steel throat emt connector instead of a chase or close nipple to the LB shows me he is not afraid to use high priced material. The romex going into the pipe insulation in pic 1 is priceless . Last edited: Jun 14, 2008
The use of a steel throat emt connector instead of a chase or close nipple to the LB shows me he is not afraid to use high priced material. The romex going into the pipe insulation in pic 1 is priceless .
480sparky Senior Member Location Iowegia Jun 14, 2008 #7 augie47 said: View attachment 1806 number two Click to expand... Kinda crooked, one or the other.... wonder how that affects grounding.
augie47 said: View attachment 1806 number two Click to expand... Kinda crooked, one or the other.... wonder how that affects grounding.
masterinbama Senior Member Location Huntsville Alabama Jun 14, 2008 #8 as long as they leave the washer lid down so you can stand on it I don't see a problem