I haven't done a commercial application in a while, and I want to make sure that I understand the codes for installation. Such as 2x4 fixtures, recessed fixtures in a suspended ceiling. Just to confirm, all fixtures, boxes need independant support wires correct?, can whips be supported be grid wires using kx clips?
NEC article 410.36
- Thread starter RDN9233
- Start date
- Status
This is not an NEC requirement, check your local building codes
See 300.11.
Roger
cycotcskir
Senior Member
Also, you may want to contact the inspector for local codes.
Here is a recent discussion on this topic:
http://forums.mikeholt.com/showthread.php?t=108072
Here is a recent discussion on this topic:
http://forums.mikeholt.com/showthread.php?t=108072
- Status