Need help, is this wire ok to run in conduit?

[Pondbuild]

Hi all. I ran 2" conduit to make it easy for me to snake wire through. I pulled wire through then realized I didn't confirm it's the right type. It says its water resistant, and it's the 3 wire in sheath type. I've been trying to find an answer for a few days.


I running it to pond area underground in conduit. Will have a 20 amp breaker


Will power an external pump 125 volt 1.8 amps


40 watt uv light


X-mas lights or LEDs around pond


Every couple weeks I'll hook up a 1hp spa blower to clean filter for about 15 minutes.


Wire type
CAROL 3/C 12 AWG (3.31 mm2) 90 degrees (UL) SJ OR WATER RESISTANT 300 volt RohS

 

[roger]

You need to call a local EC.


I am closing this thread in accordance with forum rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC? Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

Roger