Need new solenoid tester

[76nemo]

Nope, it isn't a high impedance tester like say the Fluke T5 is, so it provides enough of a load and ghost voltage "won't" show up.

Thee ONLY "tester" that Fluke provides now that is low Z in the US is the T+ and the T+Pro. Fluke offers a couple of dual impedance DMM's, but as far as "testers", the T+ and T+Pro are the only one in their line of "testers". As far as the price, why not go with a dual impedance DMM? I have the 116 which IS dual impedance. Why not go with that option if you can afford the extra $60????

 

[ishium 80439]

I am conciously using the terms "tester" and "meter" differently. My Vol-Con was a tester, my 336 is a meter. And a tester is what I want. A go to piece of equipment for most trouble shooting operations. I don't see the need to get an additional DMM. I am really straddling the fence on the T+. I'm almost convinced.

 

[electricalperson]

the T+pro is the best tester to buy. it even has a flashlight on it!!

 

[LarryFine]

Why not go with that option if you can afford the extra $60????

Extra $60? You can get a new K-60 for about that much.

 

[kbsparky]

That's correct. I have a Vol-Con, but I don't use it. I find a two-use tester confusing. Is the light due to continuity or a low voltage?....

You have not used it enough. :wink:

The light shows continuity. If you have "low" (AC) Voltage, then both lights will be lit. I call it "snake eyes" reading. That is indicative of trace, phantom, or induction current. Or, the load side of a chime transformer. :grin:

If you happen to be on a DC circuit, reversing the leads will cause the other light to switch on. I use that feature when checking the polarity of batteries in such applications as emergency lights, or checking cordless tools, etc.

Good voltage will make both those red lights come on, the neon light, and you'll feel the solenoid kick in as well.:smile:

 

[76nemo]

I am conciously using the terms "tester" and "meter" differently. My Vol-Con was a tester, my 336 is a meter. And a tester is what I want. A go to piece of equipment for most trouble shooting operations. I don't see the need to get an additional DMM. I am really straddling the fence on the T+. I'm almost convinced.

Tester and DMM, somewhat two different birds in the industry. Technically, the 336 is a clamp meter, not a full featured DMM. Why not go with dual impedance and retire/sell what you have now for a DMM? I have/use the 337 for amperage measurements. Could I just get a clamp accessory for my 87V or the 116,......sure I could. Why do I carry the T5-1000? Well, that's just frontline. Why carry the 115(hi-Z), and the T+Pro when I can have dual impedance all in one???


Give the dual impedance DMM a little more thought, or go with the T+Pro. Let us know what you decide:wink: