Fulthrotl
~Autocorrect is My Worst Enema.~
- Occupation
- E
something new from acuity lighting.
not the full control set of nlight, but it's got
occupancy sensor and daylight harvesting
built into each fixture, and wireless control
for local override. programmed with an phone app.
"[FONT="]The nLight AIR rES7 sensor is a in-fixture, low voltage, digital sensor providing embedded wireless lighting control, digital dimming, occupancy detection and daylight harvesting capabilities. The rES7 is designed for mounting heights of up to 20 ft in indoor luminaries. The rES7 sensor provides Passive Infrared (PIR) occupancy detection over a 15-20 ft (4.57-6.10 m) radial coverage pattern and photocell light level detection in one compact low profile design. The rES7 sensor is ideal for occupancy and daylighting control in suspended or recessed luminaries and comes factory integrated into Lithonia Lighting BLT, VTL, WL, and Bruno fixtures.[/FONT][FONT="][/FONT]
[FONT="]• 100% Digital PIR detection • Occupancy and photocell all in one, integrated from the factory…No onsite wiring required • Standards-based nLight AIR 900Mhz and Bluetooth radios with advanced security • Configuration and calibration via mobile application • Integral antenna - no external antenna required"
[/FONT]
not the full control set of nlight, but it's got
occupancy sensor and daylight harvesting
built into each fixture, and wireless control
for local override. programmed with an phone app.
"[FONT="]The nLight AIR rES7 sensor is a in-fixture, low voltage, digital sensor providing embedded wireless lighting control, digital dimming, occupancy detection and daylight harvesting capabilities. The rES7 is designed for mounting heights of up to 20 ft in indoor luminaries. The rES7 sensor provides Passive Infrared (PIR) occupancy detection over a 15-20 ft (4.57-6.10 m) radial coverage pattern and photocell light level detection in one compact low profile design. The rES7 sensor is ideal for occupancy and daylighting control in suspended or recessed luminaries and comes factory integrated into Lithonia Lighting BLT, VTL, WL, and Bruno fixtures.[/FONT][FONT="][/FONT]
[FONT="]• 100% Digital PIR detection • Occupancy and photocell all in one, integrated from the factory…No onsite wiring required • Standards-based nLight AIR 900Mhz and Bluetooth radios with advanced security • Configuration and calibration via mobile application • Integral antenna - no external antenna required"
[/FONT]