NO EGC FORE STOVE 4 WIRE CORD.

[domnic]

HYPOTHETICAL QUESTION ! Can i run a egc to a 3 wire stove outlet and make it a 4 wire outlet. 2011 code. (single home) ?

 

[letgomywago]

I've been allowed to when I could get a ground from a circuit closer than what it would take to refeed the oven.

 

[letgomywago]

You have to protect against physical damage if it's an 8 or 10

 

[Dennis Alwon]

How about this? I always thought this was for 120V receptacles but it doesn't say that so I think you can run an equipment grounding conductor and be compliant

250.130(C) Nongrounding Receptacle Replacement or Branch Circuit Extensions.

The equipment grounding conductor of a grounding-type receptacle or a branch-circuit extension shall be permitted to be connected to any of the following:

• (1)
  Any accessible point on the grounding electrode system as described in 250.50
• (2)
  Any accessible point on the grounding electrode conductor
• (3)
  The equipment grounding terminal bar within the enclosure where the branch circuit for the receptacle or branch circuit originates
• (4)
  An equipment grounding conductor that is part of another branch circuit that originates from the enclosure where the branch circuit for the receptacle or branch circuit originates
• (5)
  For grounded systems, the grounded service conductor within the service equipment enclosure
• (6)
  For ungrounded systems, the grounding terminal bar within the service equipment enclosure