Outdoor power cable for dust collector clean air section motor connection

[ry44023]

We have a European made dust collector being installed. The fan motors (7 each) are located in the clean air section of the dust collector and are powered by a VFD. It's common in Europe to run 4/4 power cables with cable one being shielded. Is it code to use a power cable rated for wet conditions to run from the control panel inside to the clean air section of the collector? Just want to be certain that the typical way of wiring this system in Europe meets NEC code.

Thanks!

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain.eminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.