Overhead lighting for pools

[Les Fischer]

I am designing a lighting system for an indoor pool and spa area. It has been my experience that lighting in these areas will corrode . Has anyone have advise.

Les:roll:

 

[haskindm]

Yes, it is a humid, if not damp or perhaps even wet location and fixtures should be selected accordingly. Note that you have posted this under LIGHTNING, not LIGHTING; so you may get few responses.

 

[Les Fischer]

My mistake

 

[Mr. Bill]

This question was also posted under Electrical Calculations / Engineering

 

[catchtwentytwo]

Yes, it is a humid, if not damp or perhaps even wet location and fixtures should be selected accordingly. Note that you have posted this under LIGHTNING, not LIGHTING; so you may get few responses.

Maybe the word "Lightning" should be dropped altogether or replaced with something more descriptive like "[SIZE=-1]powerful natural electrostatic discharges". :grin:[/SIZE]