Parallel Tap Connections

[tom baker]

Reviewing Mike Holts 2020 NEC changes, new rule in 300.3 C for parallel tap connectors, to tap all the parallel connectors.
Ilsco makes a tap connector for this, does anyone have a picture for a actual install you can send to Mike@mikeholt.com
Interestingly, I did a parallel tap installation in 1985 and used these tap connectors. The installation is still around but I don't have access to it to take a picture...
If you have a picture please also post here

 

[petersonra]

I had our shop use those once but I do not recall the project so can't get a picture.