Power Logic Entercept Meter

[tkb]

Has anyone had any experience with the Square D Power Logic Entercept Meters?

I have a data center that would like to monitor the power usage at about 50 power panels.

They at 4 distribution panels so all of the CT's can be in four locations.

I want to be able to monitor all of the panels from one meter and also through a web interface.

I was looking at the enhanced system.

Has anyone installed this type of system?

 

[zog]

Has anyone had any experience with the Square D Power Logic Entercept Meters?

I have a data center that would like to monitor the power usage at about 50 power panels.

They at 4 distribution panels so all of the CT's can be in four locations.

I want to be able to monitor all of the panels from one meter and also through a web interface.

I was looking at the enhanced system.

Has anyone installed this type of system?

Sure, pretty common thing, you have breakers with trip units installed now? What type?

 

[tkb]

I still need to go out and look at this before I can do any pricing.
I am assuming these are just molded case breakers don't have electronic trip units.

I was told that there are already CT's installed on the wires for the breakers already.

What happened is the space was being built out a few years ago and the company went belly up before it was finished.

The metering was never finished and I think the CT's are on the load wires and are not connected or shunted.

I was always told that if you installed a CT that wasn't connected or shunted, the CT would burn out right away when there is a load.