Where is the proper place to install a power quality analyzer? I know it depends on what you are looking for, but the facility currently has no problems. It is a building that houses a data center and offices. It has with a single service feeder that comes into a main distribution panel (480) and then downstream in another panel has a backup generator that feeds into an ATS, then into a UPS, and on down to the PDU's for the servers.
The facility would like a power quality analysis done simply to assure them that their power is OK. I have been leaning toward monitoring both the primary of the UPS and maybe some voltage monitoring at the receptacles at the PDU secondary.
Where is the proper place to monitor this sort of thing?
The facility would like a power quality analysis done simply to assure them that their power is OK. I have been leaning toward monitoring both the primary of the UPS and maybe some voltage monitoring at the receptacles at the PDU secondary.
Where is the proper place to monitor this sort of thing?