Protection/Coordination Study of power distribution system
- Thread starter dahualin
- Start date
- Status
kingpb
Senior Member
- Location
- SE USA as far as you can go
- Occupation
- Engineer, Registered
If you have never done one, I do not recommedn you attempting to do this without being under the supervision of an experienced engineer, familiar in protection and coordidnation.
For references, see the IEEE Buff Book and IEEE Red Book. For Software ETAP or SKM are your best bets.
For references, see the IEEE Buff Book and IEEE Red Book. For Software ETAP or SKM are your best bets.
www.skm.com
There is also easypower and EDSA. I use SKM. They will all provide free samples of their software (with a lot of features disabled, and a time limit on the trial).
Steve
There is also easypower and EDSA. I use SKM. They will all provide free samples of their software (with a lot of features disabled, and a time limit on the trial).
Steve
ron
Senior Member
- Location
- New York, 40.7514,-73.9925
I also use SKM, but have tried ESA easypower and EDSA
ryan_618
Senior Member
- Location
- Salt Lake City, Utah
I'm not an engineer, so you should probably take the three earlier posts more seriously than mine in this area. The times that I have seen it done, however, have been done by the manufacturer(s) of the equipment.
ron
Senior Member
- Location
- New York, 40.7514,-73.9925
Ryan,
Point taken. However, when the manufacturer does the coordination, you need to hope that they make choices that support the distribution philosophy of the owner. In many studies, there are choices to be made when deciding what should be selective and what can be compromised. The manufacturer wouldn't be in a good position to know that from the owner.
JMHO
Point taken. However, when the manufacturer does the coordination, you need to hope that they make choices that support the distribution philosophy of the owner. In many studies, there are choices to be made when deciding what should be selective and what can be compromised. The manufacturer wouldn't be in a good position to know that from the owner.
JMHO
- Status