PVC conduit to PCV nail-on boxes in new construction

Status
Not open for further replies.
SteveGraham said:
....
How would you minimize materials cost on a project like this? Romex everywhere possible (interior walls and attic) then switch to conduit (or smurf tube) (or MC) in exterior concrete filled walls?
Click to expand...
Yes, absolutely. Along those lines- don't be shy about using J boxes where and when it serves your needs. I only mention this because there is a bias against using them "frivolously" among a lot of resi guys.

Commercial guys have their issues too, like all the set screws have to point the same direction and other such nonsense.
 
ActionDave said:
Yes, absolutely. Along those lines- don't be shy about using J boxes where and when it serves your needs. I only mention this because there is a bias against using them "frivolously" among a lot of resi guys.

Commercial guys have their issues too, like all the set screws have to point the same direction and other such nonsense.
Click to expand...
i like them all pointed down so I can do a walk through and see who left one loose. You would be suprised that how often I see those set screws not even attempted to be tightend.
If they are pointed up then you might not be able to see them to check. A bit sideways is best.
 
Sierrasparky said:
i like them all pointed down so I can do a walk through and see who left one loose. You would be suprised that how often I see those set screws not even attempted to be tightend.
If they are pointed up then you might not be able to see them to check. A bit sideways is best.
Click to expand...
How do you point them down on a vertical run, or do you use some kind of special "right angle" set screws?:cool:
 
You just put saddle bends in the conduit everywhere you need a connector in a vertical run. I thought everyone knew that. :)

PS: Allows for expansion at the same time.

Tapatalk!
 
Ok point them away and visible while looking at the front of the box or run and without getting a ladder out and looking down. :rant:
 
Status
Not open for further replies.
Top