Recessed luminaires - Where to buy only the IC box (without the fixation element/can)

jelocum

Member
Location
Spain
Dear all.

My company developes LED luminaires that need a IC housing but my fixation is made by springs, so it is not suitable for the current systems inside the common IC housings in the market.

Do you know any shop or supplier where I can buy only the metal box of the IC housing (without the internal metal can)? I would like to buy IC housing and other metal accessories like mounting frames, hanger bars... but specially interest in IC housing able to receive a spring fixation like in the photo.

Thank you very much

1.jpg 2.jpg
 

JFletcher

Senior Member
Location
Williamsburg, VA
it seems to me that you could redesign the springs and make your fixtures more less like everyone else's that are designed to go into old work cans. I can tell you that having to use a special or non-standard can for somebody's light fixture is going to make me rule it out 99% of the time right off the bat.
 

jelocum

Member
Location
Spain
Thank you for your kind comments

Thank you for your kind comments

it seems to me that you could redesign the springs and make your fixtures more less like everyone else's that are designed to go into old work cans. I can tell you that having to use a special or non-standard can for somebody's light fixture is going to make me rule it out 99% of the time right off the bat.
Thank you my friend.

I will take into account for the project.
 

brantmacga

Senior Member
Location
Georgia
Occupation
Electrical contractor
You’re going to need something like one of the Juno box housings to make that work.

I picture something like the IC1JB; prob not large enough for your trim, but it’ll give you an idea.

Look at the Broan 744 housing; something like that but without the fan motor.


Sent from my iPhone using Tapatalk
 
Top