I installed several rework type 6" recessed cans. GC now says that all ceilings are going to be hung over with 1/2" drywall because of the amount of repair required.
I verified that the torsion springs are long enough on the trims to work properly.
My question is.
Is there anything codewise that would prohibit the use of the housing being 1/2" above the surface finish?
Thanks
I verified that the torsion springs are long enough on the trims to work properly.
My question is.
Is there anything codewise that would prohibit the use of the housing being 1/2" above the surface finish?
Thanks