RG59 and 120V conductors together

[ron]

I typically require separate raceway for power and video in a CCTV camera installation. The only reference that I have is 800.52(1)
I'm concerned with the 120V circuit imposing 60Hz on the coax (even though the coax is shielded).

Is there another NEC reference to use, as CCTV does not technically fall under the scope in 800.1

Do others combine power and video in the same raceway with no problem?

I guess if I think of it further, 820.52(A)(1)(b)

[ April 26, 2005, 09:26 PM: Message edited by: ron ]

 

[southernboys]

Re: RG59 and 120V conductors together

ron I think you answeard your own question however I do have one where did 820.52 go in the 2005 codebook?

 

[ron]

Re: RG59 and 120V conductors together

I was looking at 2002 NEC