Running 2 AWG from detached garage into house panel

[jonness]

I'm not sure what the best way to run the wires from outside the house into the panel are. I plan to use a 2" LB body on the outside of the house and am unsure of what to use on the inside. Should I come up from underneath the panel and use another 2" LB body to route the wires up into knockout at the bottom of the panel? Or should I go straight through the wall and into one of the lower knockouts on the lower portion of the panel back? To do the latter, I'll need to reposition the existing 1/2" conduit and LB body coming through the outside wall and into the panel (on the right in the photo of the outside of the house; see links below.).

https://ibb.co/Ns6GVm1
https://ibb.co/qBZ1t9C
https://ibb.co/b740QmH
https://ibb.co/JQ71DBx

Thanks!

 

[GoldDigger]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking report at the lower left hand corner of the post