Sat. dish install - bonding ground rod

Status
Not open for further replies.
T

tahundley

Member
I am installing a sat dish on one side of the house, and the service entrance ground is on the other. So, I need to drive a new ground rod at the sat. dish and bond it using #6 wire back to the service entrance ground, about 80 feet around the back of the house. There are several bends to do this outside. Can i run up the side of the house and through the attic then exit out the other side? Some say no problem running through the house others say do not do it. Thoughts? If it has to be outside, are all the bends OK? The house is on a slab, of course.
 
I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals
* This NEC? Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
Click to expand...
If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the
report.gif
button at the top right corner of the post.

Chris
 
Status
Not open for further replies.
Top