sevice grounds

[George Stolz]

Yes using a listed connector and a nm connector is not one of them.

The NEC does not require the GEC to be clamped to the box. Using a 1/4" hole in the bottom of the enclosure is peachy keen. See Mike's reply linked to in my last post.

 

[romeo]

service grounds

service grounds

The NEC does not require the GEC to be clamped to the box. Using a 1/4" hole in the bottom of the enclosure is peachy keen. See Mike's reply linked to in my last post.

Sorry,I thought he was using a nm connector to tie the grounds together.I better start reading slower.You know how some guys use them for temporary connections on a service riser.

 

[M. D.]

Thought I would post an image ,in this one Mike Holt shows the kenny clamp.

 

[George Stolz]

Okay, but did you read Mike's comment on the pictures featuring the Kenny Clamp?

 

[M. D.]

Yes I did , and I have also seen ,where a panel Manufacturer, I think Seimens , states the use of 1/4 K.O. is for just such purpose.

 

[George Stolz]

Sorry, I thought you were saying something else in the posting of the image.