Shared neutrals

Status
Not open for further replies.

Ricksab

New member
Is there a limit to how many shared neutrals can be used in residential wiring? I had a panel on an inspection in Chicago that had eight circuits and only four neutrals. It is a new condo conversion of a 120 year old building.
Thanks in advance for the help. Yep I the new guy.
 
no limit, but if you are under the '08 Code, 210.4(B) might make it less practical.
 
Is there a limit to how many shared neutrals can be used in residential wiring? I had a panel on an inspection in Chicago that had eight circuits and only four neutrals. It is a new condo conversion of a 120 year old building.
Thanks in advance for the help. Yep I the new guy.

I have never done any work in Chicago but, it sounds like something I would have done if I had.

Roger
 
Is there a limit to how many shared neutrals can be used in residential wiring? I had a panel on an inspection in Chicago that had eight circuits and only four neutrals. It is a new condo conversion of a 120 year old building.
Thanks in advance for the help. Yep I the new guy.

I'm not sure that I understand the question. Are you asking if each neutral can be shared by two ungrounded conductors?

Welcome to the Forum. :)
 
What? They let cows do electrical work in Chicago? I hate to discriminate, but I don't give milk, cow's shouldn't do electrical.:grin:


Mrs. O'Leary's cow was a hack?!?!!?
z133.gif
 
Made an udder mess of the job from what I know. :grin:

Man, where's Larry? I hate when I have to cover for him.

Funny, I always expect to see Larrys avatar when a joke is imminent.:grin:

I know, he must be on vacation.:grin:
Then, I flip the page and see all this stuff. :roll: Wow, that's some reputation I have here. :cool:


The truth is that I was working today, and had an estimate to look at afterward. :)
 
This is a typical installation in Chicago and surrounding area. Every thing is in conduit and it makes sense to share neutrals, to cut down on load bearing conductors, and conduit fill.

Id say if your going to Home inspect in this area you might want to study the Chicago electrical code. Other wise your going to get a lot of things wrong.
 
Status
Not open for further replies.
Top