AnthonyH
New member
- Location
- United States
Refer to attached picture of an industrial facility workbench. The 1900 Box (4 square metal Box) is served by a Flexible Cord (input power source) from the right. The 1900 box has two duplex receptacles serving loads on the workbench. In addition, on the left side of the box is another flexible cord which is intended to feed another 1900 metal box on the next workstation to the left. So, in other words, the intent is to feed the metal box from the right, and then "daisy chain" and feed the next workbench to the left. Is this an NEC violation ? to feed the metal box with flexible cord, as shown on the attached picture ?